Notebook Clevo 2700S update biosu?

[Gizmo_CZ]

Cus all.
Napsal jsem na podporu do Německa a poslali mi nejnovější bios pro můj notebook. Bohužel flash biosu do NT neovládám, (jen klasika PC) a tudíš bych potřeboval poradit jak na to??

flashovací prográmek je to Flash BIOS Utility Revision V1.46
Pro Clevo
http://www.clevo.com.tw/en/e-services/Download.asp

Tohle je napsáno v FLASHB~1.DOC souboru:

Flash utility usage :

FP /N=OEMName[,HotlineNo] BIOSFileName
or
FP /O=OEMName[,HotlineNo] BIOSFileName

Note :
1. The maxium length of OEMName is 20.
2. The OEMName is casesensitive.
3. The system manufacturer name read from DMI BIOS interface is OEMName padded with blanks(ASCII 20h) and the length of OEMName+blanks is 20.
4. If you need space character for OEMName and HotlineNo,
Replace it with a special character “^”.
5. After flash the BIOS, turn power off and turn it on, then you can see the OEMName by using the DEBUG command as following :
DEBUG
-D F000:1C00
6. Some valid examples:
a.The hotline number for “Test Computer” company is
123 4567 890. Then the usage for FP is as following :

FP /N=Test^Computer,123^4567^890 BIOS.BIN

b.The hotline number for “MyComputer” company is
123-4567-890. Then the usage for FP is as following :

FP /N=MyComputer,123-4567-890 BIOS.BIN

c.To disable OEMName and HotlineNo : (FP v1.41 or later)

FP /N=KAPOK,KAPOK BIOS.BIN
7. /O option will disable the OEMName string display during BIOS POST.


Nebo to raději mám dát do PC obchodu aby mi to udělali tam??